Welcome, guest! Login / Register - Why register?
Psst.. new poll here.
Psst.. new forums here.
Microsoft is blocking us again (TY IP Reputation!) so just use oauth login instead. :)

Paste

Pasted as text by DENNIS ( 17 years ago )
Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1 port 56365, id=46, length=105
        Service-Type = Framed-User
        Framed-Protocol = PPP
        User-Name = "dennis"
        CHAP-Challenge = 0xbcc53c1340bd31f2d8eb4f64641a34608d9f
        CHAP-Password = 0x066af3d2fee5a8be26dba19af76fa081f7
        Calling-Station-Id = "172.16.90.39"
        NAS-IP-Address = 127.0.0.1
        NAS-Port = 1
+- entering group authorize {...}
++[preprocess] returns ok
[chap] Setting 'Auth-Type := CHAP'
++[chap] returns ok
++[mschap] returns noop
[suffix] No '@' in User-Name = "dennis", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[unix] returns notfound
[files] users: Matched entry DEFAULT at line 1
++[files] returns ok
Exec-Program output: Acct-Interim-Interval = 60, Session-Timeout = 914423, PPPD-Upstream-Speed-Limit = 0, Octets-Direction = 0, Framed-IP-Address = 192.168.160.145, Session-Octets-Limit = 2146435072, Framed-IP-Netmask = 255.255.255.255, PPPD-Downstream-Speed-Limit = 0,
Exec-Program-Wait: value-pairs: Acct-Interim-Interval = 60, Session-Timeout = 914423, PPPD-Upstream-Speed-Limit = 0, Octets-Direction = 0, Framed-IP-Address = 192.168.160.145, Session-Octets-Limit = 2146435072, Framed-IP-Netmask = 255.255.255.255, PPPD-Downstream-Speed-Limit = 0,
Exec-Program: returned: 0
++[abills_auth] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user.  Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = CHAP
+- entering group CHAP {...}
[chap] login attempt by "dennis" with CHAP password
[chap] Cleartext-Password is required for authentication
++[chap] returns invalid
Failed to authenticate the user.
Using Post-Auth-Type Reject
+- entering group REJECT {...}
Exec-Program output:
Exec-Program: returned: 0
++[abills_postauth] returns ok
Delaying reject of request 0 for 1 seconds
Going to the next request
Waking up in 0.2 seconds.
Sending delayed reject for request 0
Sending Access-Reject of id 46 to 127.0.0.1 port 56365
        Acct-Interim-Interval = 60
        Session-Timeout = 914423
        PPPD-Upstream-Speed-Limit = Bridge-No
        Octets-Direction = Route-IP-No
        Framed-IP-Address = 192.168.160.145
        Session-Octets-Limit = 2146435072
        Framed-IP-Netmask = 255.255.255.255
        PPPD-Downstream-Speed-Limit = Send-Auth-None
Waking up in 4.9 seconds.
Cleaning up request 0 ID 46 with timestamp +8
Ready to process requests.

 

Revise this Paste

Your Name: Code Language: