#import "SettingsViewController.h"
#import "NSDataCrypto.h"

@implementation SettingsViewController

@synthesize selectedPrinterName;
@synthesize selectedPrinterAddress;
@synthesize firmwareFile;
@synthesize scanMode;

static NSString *settings[]={
 @"Beep upon scan",
 @"Enable scan button",
 @"Magnetic card raw mode",
 @"Synchronization enabled", 
 @"Automated charge enabled",
 @"Barcode engine always on"
};

static NSString *scan_modes[]={
 @"Single scan",
 @"Multi scan",
 @"Motion detect",
 @"Single scan on button release",
};


enum SETTINGS{
 SET_BEEP=0,
 SET_ENABLE_SCAN_BUTTON,
 SET_MSR_RAW,
 SET_SYNC_ENABLED,
 SET_AUTOCHARGING,
 SET_ENGINE_ON,
    SET_LAST
};

static BOOL settings_values[SET_LAST];
//static int scanMode;

#define TARGET_LINEA 0
#define TARGET_EMSR 1
#define TARGET_OPTICON 2
#define TARGET_CODE 3

int beep1[]={2730,250};
int beep2[]={2730,150,65000,20,2730,150};

-(void)displayAlert:(NSString *)title message:(NSString *)message
{
 UIAlertView *alert = [[UIAlertView alloc] initWithTitle:title message:message delegate:nil cancelButtonTitle:@"Ok" otherButtonTitles:nil, nil];
 [alert show];
}

-(NSString *)getLineaFirmwareFileName
{
 NSError *error;
 NSString *name=[[linea.deviceName stringByReplacingOccurrencesOfString:@" " withString:@""] lowercaseString];
 NSArray *files=[[NSFileManager defaultManager] contentsOfDirectoryAtPath:[[NSBundle mainBundle] resourcePath] error:&error;];
 int lastVer=0;
 NSString *lastPath;
 for(int i=0;i<[files count];i++)
 {
  NSString *file=[[files objectAtIndex:i] lastPathComponent];
        //if([[file lowercaseString] isEqualToString:@"lineapro4c_xbcmbl_243.bin"])
        //    NSLog(@"checking: %@",file);
  if([[file lowercaseString] rangeOfString:name].location!=NSNotFound)
  {
   NSString *path=[[[NSBundle mainBundle] resourcePath] stringByAppendingPathComponent:file];
            NSDictionary *info=[linea getFirmwareFileInformation:[NSData dataWithContentsOfFile:path] error:&error;];
            if(info)
                NSLog(@"file: %@, name=%@, model=%@",file,[info objectForKey:@"deviceName"],[info objectForKey:@"deviceModel"]);
   if(info && [[info objectForKey:@"deviceName"] isEqualToString:linea.deviceName] && [[info objectForKey:@"deviceModel"] isEqualToString:linea.deviceModel] && [[info objectForKey:@"firmwareRevisionNumber"] intValue]>lastVer)
   {
    lastPath=path;
    lastVer=[[info objectForKey:@"firmwareRevisionNumber"] intValue];
   }
  }
 }
 if(lastVer>0)
  return lastPath;
 return nil;
}

-(NSString *)getEMSRFirmwareFileName
{
 NSError *error;
    
 NSArray *files=[[NSFileManager defaultManager] contentsOfDirectoryAtPath:[[NSBundle mainBundle] resourcePath] error:&error;];
 NSString *name=[[[linea emsrGetDeviceModel:nil] stringByReplacingOccurrencesOfString:@" " withString:@""] lowercaseString];
    if(!name)
        return nil;
    
 int lastVer=0;
 NSString *lastPath;
 for(int i=0;i<[files count];i++)
 {
  NSString *file=[[[files objectAtIndex:i] lastPathComponent] lowercaseString];
  if([file rangeOfString:name].location!=NSNotFound)
  {
   NSString *path=[[[NSBundle mainBundle] resourcePath] stringByAppendingPathComponent:[files objectAtIndex:i]];
            
            NSDictionary *info=[linea emsrGetFirmwareInformation:[NSData dataWithContentsOfFile:path]];
   if(info /*&& [[info objectForKey:@"deviceName"] isEqualToString:[linea emsrGetDeviceModel]] && [[info objectForKey:@"firmwareRevisionNumber"] intValue]>lastVer*/)
   {
    lastPath=path;
    lastVer=[[info objectForKey:@"firmwareRevisionNumber"] intValue];
   }
  }
 }
 if(lastVer>0)
  return lastPath;
 return nil;
}

-(void)connectionState:(int)state {
    NSError *error;
    NSLog(@"in settingzzzzz");
    
 switch (state) {
  case CONN_DISCONNECTED:
  case CONN_CONNECTING:
   break;
  case CONN_CONNECTED:
   //set defaults
   settings_values[SET_BEEP]=TRUE;
   
   //read settings
            int value;
   if([linea getScanButtonMode:&value; error:&error;])
                settings_values[SET_ENABLE_SCAN_BUTTON]=(value==BUTTON_ENABLED);
            else
                settings_values[SET_ENABLE_SCAN_BUTTON]=FALSE;
            
   if([linea getMSCardDataMode:&value; error:&error;])
                settings_values[SET_MSR_RAW]=(value==MS_RAW_CARD_DATA);
            else
                settings_values[SET_MSR_RAW]=FALSE;
            
   if([linea getSyncButtonMode:&value; error:&error;])
                settings_values[SET_SYNC_ENABLED]=(value==BUTTON_ENABLED);
            else
                settings_values[SET_SYNC_ENABLED]=FALSE;
            
   settings_values[SET_AUTOCHARGING]=[[NSUserDefaults standardUserDefaults] boolForKey:@"AutoCharging"];
   settings_values[SET_ENGINE_ON]=[[NSUserDefaults standardUserDefaults] boolForKey:@"BarcodeEngineOn"];
            
            if(![linea getScanMode:&scanMode; error:&error;])
                scanMode=0;
   
   [settingsTable reloadData];
   break;
 }
}

-(void)firmwareUpdateEnd:(NSError *)error
{
    [progressViewController.view removeFromSuperview];
    if(error)
        [self displayAlert:NSLocalizedString(@"Firmware Update",nil) message:[NSString stringWithFormat:NSLocalizedString(@"Firmware updated failed with error:%@",nil),error.localizedDescription]];
}

-(void)firmwareUpdateDisplayProgress
{
    switch (progressPhase)
    {
        case UPDATE_INIT:
            [progressViewController updateProgress:NSLocalizedString(@"Initializing update...",nil) progress:progressPercent];
            break;
        case UPDATE_ERASE:
            [progressViewController updateProgress:NSLocalizedString(@"Erasing flash...",nil) progress:progressPercent];
            break;
        case UPDATE_WRITE:
            [progressViewController updateProgress:NSLocalizedString(@"Writing firmware...",nil) progress:progressPercent];
            break;
        case UPDATE_COMPLETING:
            [progressViewController updateProgress:NSLocalizedString(@"Completing operation...",nil) progress:progressPercent];
            break;
        case UPDATE_FINISH:
            [progressViewController updateProgress:NSLocalizedString(@"Complete!",nil) progress:progressPercent];
            break;
    }
}

-(void)firmwareUpdateProgress:(int)phase percent:(int)percent
{
    progressPhase=phase;
    progressPercent=percent;
    [self performSelectorOnMainThread:@selector(firmwareUpdateDisplayProgress) withObject:nil waitUntilDone:FALSE];
}

-(void)firmwareUpdateThread:(NSString *)file
{
 @autoreleasepool {
        
        NSError *error=nil;
        
        BOOL idleTimerDisabled_Old=[UIApplication sharedApplication].idleTimerDisabled;
        
        [[UIApplication sharedApplication] setIdleTimerDisabled: YES];
        
        if(fwUpdateTarget==TARGET_LINEA)
        {
            //In case authentication key is present in the Linea, we need to authenticate with it first, before firmware update is allowed
            //For the sample here I'm using the field "Authentication key" in the crypto settings as data and generally ignoring the result of the
            //authentication operation, firmware update will just fail if authentication have failed
            NSUserDefaults *prefs = [NSUserDefaults standardUserDefaults];
            //last used decryption key is stored in preferences
            NSString *authenticationKey=[prefs objectForKey:@"AuthenticationKey"];
            if(authenticationKey==nil || authenticationKey.length!=32)
                authenticationKey=@"11111111111111111111111111111111"; //sample default
            
            [linea cryptoAuthenticateiPod:[authenticationKey dataUsingEncoding:NSASCIIStringEncoding] error:nil];
            [linea updateFirmwareData:[NSData dataWithContentsOfFile:file] error:&error;];
        }
        if(fwUpdateTarget==TARGET_EMSR)
        {
            [linea emsrUpdateFirmware:[NSData dataWithContentsOfFile:file] error:&error;];
        }
        if(fwUpdateTarget==TARGET_OPTICON)
        {
            NSString *file05=[[[NSBundle mainBundle] resourcePath] stringByAppendingPathComponent:@"Opticon_FL49J05.bin"];
            NSString *fileBoot=[[[NSBundle mainBundle] resourcePath] stringByAppendingPathComponent:@"Opticon_BOOT.bin"];
            NSString *file09=[[[NSBundle mainBundle] resourcePath] stringByAppendingPathComponent:@"Opticon_FL49J09.bin"];
            NSFileManager *fileManager=[NSFileManager defaultManager];
            
            if([fileManager fileExistsAtPath:file05] && [fileManager fileExistsAtPath:fileBoot] && [fileManager fileExistsAtPath:file09])
            {
                [progressViewController performSelectorOnMainThread:@selector(updateText:) withObject:@"Updating to version FL49J05...\nPlease wait!" waitUntilDone:NO];
                if([linea barcodeOpticonUpdateFirmware:[NSData dataWithContentsOfFile:file05] bootLoader:FALSE error:&error;])
                {
                    [progressViewController performSelectorOnMainThread:@selector(updateText:) withObject:@"Updating Bootloader code...\nPlease wait!" waitUntilDone:NO];
                    if([linea barcodeOpticonUpdateFirmware:[NSData dataWithContentsOfFile:fileBoot] bootLoader:TRUE error:&error;])
                    {
                        [progressViewController performSelectorOnMainThread:@selector(updateText:) withObject:@"Updating to version Opticon_FL49J09...\nPlease wait!" waitUntilDone:NO];
                        [linea barcodeOpticonUpdateFirmware:[NSData dataWithContentsOfFile:file09] bootLoader:FALSE error:&error;];
                    }
                }
            }
            //power off/on the engine
            [linea barcodeEnginePowerControl:FALSE error:nil];
            [linea barcodeEnginePowerControl:settings_values[SET_ENGINE_ON] maxTimeMinutes:30 error:nil];
        }
        if(fwUpdateTarget==TARGET_CODE)
        {
            [progressViewController performSelectorOnMainThread:@selector(updateText:) withObject:@"Updating engine...\nPlease wait!" waitUntilDone:NO];
            [linea barcodeCodeUpdateFirmware:[self.firmwareFile lastPathComponent] data:[NSData dataWithContentsOfFile:self.firmwareFile] error:&error;];
        }
        
        [[UIApplication sharedApplication] setIdleTimerDisabled: idleTimerDisabled_Old];
        [self performSelectorOnMainThread:@selector(firmwareUpdateEnd:) withObject:error waitUntilDone:FALSE];
        
    }
}

-(void)alertView:(UIAlertView *)alertView clickedButtonAtIndex:(NSInteger)buttonIndex
{
 if(buttonIndex == 1)
 {
        //Make firmware update prettier - call it from a thread and listen to the notifications only
        [progressViewController viewWillAppear:FALSE];
        [self.view addSubview:progressViewController.view];
        
        [NSThread detachNewThreadSelector:@selector(firmwareUpdateThread:) toTarget:self withObject:firmwareFile];
 }
}

-(void)checkForLineaFirmwareUpdate;
{
 self.firmwareFile=[self getLineaFirmwareFileName];
 if(self.firmwareFile==nil)
 {
  UIAlertView *alert = [[UIAlertView alloc] initWithTitle:NSLocalizedString(@"Firmware Update",nil)
              message:NSLocalizedString(@"No firmware for this device model present",nil) delegate:nil cancelButtonTitle:NSLocalizedString(@"Ok",nil) otherButtonTitles:nil, nil];
  [alert show];
 }else {
        NSDictionary *info=[linea getFirmwareFileInformation:[NSData dataWithContentsOfFile:self.firmwareFile] error:nil];
  
  if(info && [[info objectForKey:@"deviceName"] isEqualToString:linea.deviceName] && [[info objectForKey:@"deviceModel"] isEqualToString:linea.deviceModel])
  {
            UIAlertView *alert = [[UIAlertView alloc] initWithTitle:NSLocalizedString(@"Firmware Update",nil)
                                                            message:[NSString stringWithFormat:NSLocalizedString(@"Linea ver: %@\nAvailable: %@\n\nDo you want to update firmware?\n\nDO NOT DISCONNECT LINEA DURING FIRMWARE UPDATE!",nil),[linea firmwareRevision],[info objectForKey:@"firmwareRevision"]]
                                                           delegate:self cancelButtonTitle:NSLocalizedString(@"Cancel",nil) otherButtonTitles:NSLocalizedString(@"Update",nil), nil];
            [alert show];
  }else {
   UIAlertView *alert = [[UIAlertView alloc] initWithTitle:NSLocalizedString(@"Firmware Update",nil)
               message:NSLocalizedString(@"No firmware for this device model present",nil) delegate:nil cancelButtonTitle:NSLocalizedString(@"Ok",nil) otherButtonTitles:nil, nil];
   [alert show];
  }
 }
}

-(void)checkForEMSRFirmwareUpdate;
{
 self.firmwareFile=[self getEMSRFirmwareFileName];
 if(self.firmwareFile==nil)
 {
  UIAlertView *alert = [[UIAlertView alloc] initWithTitle:NSLocalizedString(@"Firmware Update",nil)
              message:NSLocalizedString(@"No firmware for this device model present",nil) delegate:nil cancelButtonTitle:NSLocalizedString(@"Ok",nil) otherButtonTitles:nil, nil];
  [alert show];
 }else {
        NSDictionary *info=[linea emsrGetFirmwareInformation:[NSData dataWithContentsOfFile:self.firmwareFile]];
  
  if([[info objectForKey:@"deviceModel"] isEqualToString:[linea emsrGetDeviceModel:nil]])
  {
            int emsrFWVersion=0;
            [linea emsrGetFirmwareVersion:&emsrFWVersion; error:nil];
            
            UIAlertView *alert = [[UIAlertView alloc] initWithTitle:NSLocalizedString(@"Firmware Update",nil)
                                                            message:[NSString stringWithFormat:NSLocalizedString(@"Head ver: %d.d\nAvailable: %@\n\nDo you want to update firmware?\n\nDO NOT DISCONNECT LINEA DURING FIRMWARE UPDATE!",nil),emsrFWVersion/100,emsrFWVersion0,[info objectForKey:@"firmwareRevision"]]
                                                           delegate:self cancelButtonTitle:NSLocalizedString(@"Cancel",nil) otherButtonTitles:NSLocalizedString(@"Update",nil), nil];
            [alert show];
  }else {
   UIAlertView *alert = [[UIAlertView alloc] initWithTitle:NSLocalizedString(@"Firmware Update",nil)
               message:NSLocalizedString(@"No firmware for this device model present",nil) delegate:nil cancelButtonTitle:NSLocalizedString(@"Ok",nil) otherButtonTitles:nil, nil];
   [alert show];
  }
 }
}

-(void)checkForOpticonFirmwareUpdate;
{
    self.firmwareFile=[[[NSBundle mainBundle] resourcePath] stringByAppendingPathComponent:@"Opticon_FL49J05.bin"];
    NSString *opticonIdent=[linea barcodeOpticonGetIdent:nil];
    
 if(self.firmwareFile==nil)
 {
  UIAlertView *alert = [[UIAlertView alloc] initWithTitle:NSLocalizedString(@"Firmware Update",nil)
              message:NSLocalizedString(@"No firmware for this device model present",nil) delegate:nil cancelButtonTitle:NSLocalizedString(@"Ok",nil) otherButtonTitles:nil, nil];
  [alert show];
 }else
    {
        UIAlertView *alert = [[UIAlertView alloc] initWithTitle:NSLocalizedString(@"Firmware Update",nil)
                                                        message:[NSString stringWithFormat:NSLocalizedString(@"Current engine firmware: %@\n\nDo you want to update firmware?\n\nDO NOT DISCONNECT LINEA DURING FIRMWARE UPDATE!",nil),opticonIdent]
                                                       delegate:self cancelButtonTitle:NSLocalizedString(@"Cancel",nil) otherButtonTitles:NSLocalizedString(@"Update",nil), nil];
        [alert show];
 }
}

-(void)checkForCodeFirmwareUpdate;
{
    self.firmwareFile=[[[NSBundle mainBundle] resourcePath] stringByAppendingPathComponent:@"C005922_0288-system-cr8000-CD_GEN.CRZ"];
 if(self.firmwareFile==nil)
 {
  UIAlertView *alert = [[UIAlertView alloc] initWithTitle:NSLocalizedString(@"Firmware Update",nil)
              message:NSLocalizedString(@"No firmware for this device model present",nil) delegate:nil cancelButtonTitle:NSLocalizedString(@"Ok",nil) otherButtonTitles:nil, nil];
  [alert show];
    }else
    {
        NSDictionary *info=[linea barcodeCodeGetInformation:nil];
        if(!info)
        {
            UIAlertView *alert = [[UIAlertView alloc] initWithTitle:NSLocalizedString(@"Firmware Update",nil)
                                                            message:NSLocalizedString(@"Code engine not present or not responding",nil) delegate:nil cancelButtonTitle:NSLocalizedString(@"Ok",nil) otherButtonTitles:nil, nil];
            [alert show];
        }else
        {
            UIAlertView *alert = [[UIAlertView alloc] initWithTitle:NSLocalizedString(@"Firmware Update",nil)
                                                            message:[NSString stringWithFormat:@"Reader info:\n%@\nDo you want to update engine firmware?",info]
                                                           delegate:self cancelButtonTitle:NSLocalizedString(@"Cancel",nil) otherButtonTitles:NSLocalizedString(@"Update",nil), nil];
            [alert show];
        }
    }
}

-(void)bluetoothDeviceDiscovered:(NSString *)btAddress name:(NSString *)btName
{
    [printers addObject:btAddress];
    [printers addObject:btName];
}

-(void)bluetoothDiscoverComplete:(BOOL)success
{
    [progressViewController.view removeFromSuperview];
    [linea btmSetEnabled:FALSE error:nil];
    [settingsTable reloadData];
    if(!success)
        [self displayAlert:NSLocalizedString(@"Bluetooth Error",nil) message:NSLocalizedString(@"Printer discovery failed!",nil)];
}

- (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView {
    // Number of sections is the number of region dictionaries
    return 4;
}

- (NSString *)tableView:(UITableView *)aTableView titleForHeaderInSection:(NSInteger)section {
 switch (section)
 {
  case 0:
   return NSLocalizedString(@"General Settings",nil);
  case 1:
   return NSLocalizedString(@"Barcode Scan Mode",nil);
  case 2:
   return NSLocalizedString(@"Bluetooth Printers",nil);
  case 3:
   return NSLocalizedString(@"Firmware Update",nil);
 }
 return @"";
}

- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section {
    // Number of rows is the number of names in the region dictionary for the specified section
 switch (section)
 {
  case 0:
   return SET_LAST;
  case 1:
   return 4;
  case 2:
   return [printers count]/2+1;
  case 3:
   return 4;
 }
 return 0;
}

NSString *getLogFile&#40;&#41;
{
 NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
 return [[paths objectAtIndex:0] stringByAppendingPathComponent:@"random.bin"];
}

- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
{
    NSError *error;
    
 if(linea.connstate!=CONN_CONNECTED)
  return;
 
 switch ([indexPath indexAtPosition:0])
 {
  case 0:
        {
   if(settings_values[indexPath.row])
   {
    settings_values[indexPath.row]=FALSE;
   }else
   {
    settings_values[indexPath.row]=TRUE;
   }
   switch (indexPath.row)
            {
                case SET_BEEP:
                    if(settings_values[SET_BEEP])
                    {
                        [linea setScanBeep:settings_values[SET_BEEP] volume:100 beepData:beep2 length:sizeof(beep2) error:nil]; 
                    }else
                    {
                        [linea setScanBeep:settings_values[SET_BEEP] volume:0 beepData:nil length:0 error:nil]; 
                    }
                    break;
                case SET_ENABLE_SCAN_BUTTON:
                    [linea setScanButtonMode:settings_values[SET_ENABLE_SCAN_BUTTON] error:nil];
                    break;
                case SET_MSR_RAW:
                    [linea setMSCardDataMode:settings_values[SET_MSR_RAW] error:nil];
                    break;
                case SET_SYNC_ENABLED:
                    [linea setSyncButtonMode:settings_values[SET_SYNC_ENABLED] error:nil];
                    break;
                case SET_AUTOCHARGING:
                {
                    [[NSUserDefaults standardUserDefaults] setBool:settings_values[SET_AUTOCHARGING] forKey:@"AutoCharging"];
                    [[NSUserDefaults standardUserDefaults] synchronize];
                    [linea setCharging:settings_values[SET_AUTOCHARGING] error:nil];
                    break;
                }
                case SET_ENGINE_ON:
                    [[NSUserDefaults standardUserDefaults] setBool:settings_values[SET_ENGINE_ON] forKey:@"BarcodeEngineOn"];
                    [[NSUserDefaults standardUserDefaults] synchronize];
                    [linea barcodeEnginePowerControl:settings_values[SET_ENGINE_ON] maxTimeMinutes:30 error:nil];
                    break;
            }
   [[tableView cellForRowAtIndexPath: indexPath] setAccessoryType:settings_values[indexPath.row]?UITableViewCellAccessoryCheckmark:UITableViewCellAccessoryNone];
   break;
        }
        case 1:
            if([linea setScanMode:indexPath.row error:nil])
                scanMode=indexPath.row;
            [tableView reloadData];
            break;
  case 2:
        {
   if(indexPath.row)
   {
    selectedPrinterAddress=[printers objectAtIndex:(indexPath.row-1)*2];
                selectedPrinterName=[printers objectAtIndex:(indexPath.row-1)*2+1];
                NSUserDefaults *prefs = [NSUserDefaults standardUserDefaults];
                [prefs setObject:selectedPrinterAddress forKey:@"selectedPrinterAddress"];
                [prefs setObject:selectedPrinterName forKey:@"selectedPrinterName"];
                [prefs synchronize];
                [tableView reloadData];
   }else {
                /*NSMutableData *d=[[NSMutableData alloc] init];
                 for(int i=0;i<2600/16;i++)
                 {
                 [d appendData:[linea cryptoRawGenerateRandomData]];
                 }
                 [d writeToFile:getLogFile&#40;&#41; atomically:YES];*/
    //scan for printers
                [progressViewController viewWillAppear:FALSE];
    [self.view addSubview:progressViewController.view];
    [[NSRunLoop currentRunLoop] runUntilDate:[NSDate dateWithTimeIntervalSinceNow:0.01]];
    if([linea btmSetEnabled:TRUE error:&error;])
                {
                    [printers removeAllObjects];
                    [linea prnDiscoverPrintersInBackground:10 maxTime:10.0 error:&error;];
                }else {
                    [progressViewController.view removeFromSuperview];
                    ERRMSG(NSLocalizedString(@"Bluetooth Error",nil));
                }
   }
   break;
        }
  case 3:
        {
            fwUpdateTarget=indexPath.row;
            if(fwUpdateTarget==TARGET_LINEA)
                [self checkForLineaFirmwareUpdate];
            if(fwUpdateTarget==TARGET_EMSR)
                [self checkForEMSRFirmwareUpdate];
            if(fwUpdateTarget==TARGET_OPTICON)
                [self checkForOpticonFirmwareUpdate];
            if(fwUpdateTarget==TARGET_CODE)
                [self checkForCodeFirmwareUpdate];
   break;
        }
 }
}

- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath {
 CGRect CellFrame = CGRectMake(0, 0, 300, 60);
 UITableViewCell *cell=[[UITableViewCell alloc] initWithFrame:CellFrame];
 
 switch ([indexPath indexAtPosition:0])
 {
  case 0:
        {
   if(settings_values[indexPath.row])
    cell.accessoryType=UITableViewCellAccessoryCheckmark;
   else
    cell.accessoryType=UITableViewCellAccessoryNone;
   [[cell textLabel] setText:NSLocalizedString(settings[indexPath.row],nil)];
   return cell;
        }
  case 1:
        {
   if(scanMode==indexPath.row)
    cell.accessoryType=UITableViewCellAccessoryCheckmark;
   else
    cell.accessoryType=UITableViewCellAccessoryNone;
   [[cell textLabel] setText:NSLocalizedString(scan_modes[indexPath.row],nil)];
   return cell;
        }
  case 2:
        {
   if(indexPath.row)
   {
    [[cell textLabel] setText:[NSString stringWithFormat:@"%@ (%@)",[printers objectAtIndex:(indexPath.row-1)*2+1],[printers objectAtIndex:(indexPath.row-1)*2]]];
    if(selectedPrinterAddress && [[printers objectAtIndex:(indexPath.row-1)*2] isEqualToString:selectedPrinterAddress])
     cell.accessoryType=UITableViewCellAccessoryCheckmark;
    else
     cell.accessoryType=UITableViewCellAccessoryNone;
   }else
    [[cell textLabel] setText:NSLocalizedString(@"Discover printers",nil)];
   return cell;
        }
  case 3:
        {
   switch (indexPath.row)
            {
                case 0:
                    [[cell textLabel] setText:NSLocalizedString(@"Update Linea firmware",nil)];
                    break;
                case 1:
                    [[cell textLabel] setText:NSLocalizedString(@"Update Encrypted Head firmware",nil)];
                    break;
                case 2:
                    [[cell textLabel] setText:NSLocalizedString(@"Update opticon firmware",nil)];
                    break;
                case 3:
                    [[cell textLabel] setText:NSLocalizedString(@"Update code firmware",nil)];
                    break;
            }
        }
   return cell;
 }
 return nil; 
}

- (void)viewWillAppear:(BOOL)animated
{
 NSUserDefaults *prefs = [NSUserDefaults standardUserDefaults];
 selectedPrinterAddress=[prefs objectForKey:@"selectedPrinterAddress"];
 selectedPrinterName=[prefs objectForKey:@"selectedPrinterName"];
    if(![printers count] && selectedPrinterAddress)
    {
        [printers addObject:selectedPrinterAddress];
        [printers addObject:selectedPrinterName];
        [settingsTable reloadData];
    }
 
 //update display according to current linea state
 [self connectionState:linea.connstate];
}


- (void)viewDidLoad
{
    
    NSLog(@"in viewDidLoad");
 linea=[Linea sharedDevice];
 [linea addDelegate:self];
    printers=[[NSMutableArray alloc] init];
    [super viewDidLoad];
}

@end

Add a code snippet to your website: www.paste.org